are you missing a screw??!!

 

Sometimes it happens so .. When i started working on the box i noticed the screws on the original panel as they were non standard ,so in order to save them i put them back on the front panel once i got the panel out .Somehow in a month or so , while working on the electronics that panel got lost somewhere in the basement ,and when it was time to start populating the panel i made i just couldn't find the screws Now there are 4 ugly holes that i need to mask somehow ,it ruins the picture a bit but i can live with it . 

The enclosure as factory made provides 2 rectangular holes just exact fit in the back to add 6 banana jacks ,i made those four individual sampler outputs plus a mix output that is the selection made with the white push buttons from the bottom of the panel , and finally ground .The DIN socket connects to external PSU.

 

 What i learned from my previous groovebox proves to be right , i installed a switch from the main clock to the 208 Music Easel Random Section ...cause when it stops clocking the Uncorrelated Random remains at that random last step . 

Other feature i find useful is having one of the excite inputs of the Neural Pulsers at the bottom of the panel where it's easy to tap with your fingers cause one can trigger a neuron in such way ,along with the potentiometers at the bottom of the panel for easy access it's performance friendly ,while most of the patching is done in the middle of the panel ..

The little box in the background is a fifth voice ,another Hagiwo Sampler with additional XR2206 LFO ,and Synthrotek Dirt Filter .