audiomulch in noise

амбиентална

Soldermask Arp Quadra Phaser PCB

 from making the ARP Quadra Phaser adaptation by Jurgen Haible ,i get my pcb's done locally and this is how it's done .

VCA with CA3046

 pcb layout

 

555 VCO

 Thomas Henry 555 VCO PCB Layout ,tested and working ,the dual transistor thing in the 8 pin Dip socket is BCM857 ,this is a slim down version with only triangle and ramp outputs

Freq Shifter - Part 1

 Frequency Shifter - Part 1

Serge Triple Waveshaper

 PCB Layout for Serge Triple Waveshaper ,this is the original Serge PCB that was hosted at old CGS Website ,i redraw it and built already two of these ,the only flaw is that it's bit quiet ,so i've added a Serge schematic of High Gain Amp and it suits perfect 

Box

VCA

Trying out Double-Sided Boards ,for test ,completely unnecessary - Electronotes VCA based on the design by Dave Rossum of EMU  

Jurgen Haible - Morphing Programmer

 Jurgen Haible's Morphing Programmer ,it appears to be very cool module ,and not so many people have built it ,but the idea is more then something between panner and scanner ..and it prolly is fun to play ,i have not built this so i can not confirm it's operation , however i assumed that Jurgen's drawing is correct ,here's a pcb layout if anyone wants to give it a try ,the wiring for this would be a nightmare for some ,i re-checked the layout few times and it appears to be the Jurgen's drawings ,the pcb is big 175x105mm but maybe it will fit in 5U or as standalone controller ,i intended to make a standalone controller with it ,and this fits exactly in the enclosure i intended .

 

 

 

 

Positive Slew (PCB Layout)

 

PCB layout for Positive Slew in case anyone
wants to build the Serge Positive Slew ,to mention it's only single Positive slew ,and not dual like in original Serge ,however it's easy to make as the board is big and suitable for beginners ,not dense as in the CGS boards which i also have redrawn for this module,the board is 100x100mm ,tested and workin ,few values of resistors are not labeled but very easy to find looking at the positive slew schematic ..the resistor connected to out and pin 8 of the lower LM3900 is 820K and the resistor from neg (negative pulse out) and pin 9 is 220R  ,between base of the transistor and out is 4k7,Good luck !

 

 

 

 

 

 

Noisy recording from year ago

 

 Here is full scale of  the Filter Bank from Osamu Hoshuyama in case anyone wants to build it .

 

   

Fixed filter bank by Osamu Hoshuyama .

Original schematic for this module is here https://houshu.at.webry.info/201703/article_2.html

Bastle Kastl in 4U

 PCB layout for Bastl Kastle in 4U ,this includes additional 5.1V Zenner diodes for protection on each CV input ,the Panel is something i came accross at ModularGrid

 

 

Urei 555

Urei 533

not so hard to diy ,graphic eq from Urei

Slightly remixed

free to download at bandcamp : https://vladoshribski.bandcamp.com/album/bamboo